Hard to believe but about 8-years ago I bought a nickeled, Smith and Wesson Model 34 2-inch. While I shot it a bit I held back on my posts as I tried to work out some problems I had with the gun. It may have extracted a bit harder than it should with a couple of different loads but more importantly, to the point that any other problems were completely overshadowed, was that after a couple of cylinders full the cylinder was almost impossible to turn at one point. A not so close examination of the outside of the cylinder showed that there was one point on the outside circumference of the cylinder face was just rubbing the barrel root and this was exacerbated by the buildup of powder residue. After some pondering and the natural distractions of life I decided it would be best to have Smith and Wesson do the repair. I contacted them and got some information on how to send the gun and packed it. Then something else came up and I was further delayed. Another attempt was in order and so off went another e-mail to verify the previous instructions which were now a couple of years old.
I had been trying to get S&W to communicate with me for a couple of weeks on how to get this revolver repaired before finally receiving a message that indicated that they would send a call tag for it. I followed up with S&W on March 3 but didn't hear back from them for a couple of weeks. On my birthday I got the gun shipped to Smith and Wesson via FEDEX. April 25th I received a bill, in the mail, for the charges for evaluation of my revolver ($58.00). Saturday I got notice it had been shipped and they tried to deliver it today but I'll have to wait until Thursday to get it. Communication has been pretty much non-existent on their part unless asking for money. The folks at S&W never bother to let me know what was wrong, work that needed to be done, etc. It was 2-days shy of 2-months since I sent the gun to them.
The gun was FINALLY delivered today after a week of missed meetings, etc. The crane definitely has a changed relationship to the frame and the cylinder has the same relationship to the barrel through a complete rotation. I'm betting I was right about the bent crane. Of course I had to test fire the gun. Then, aw heck, cases stick! Out comes the chamber iron and all is now well. Well, except it shoots a bit high at 21 feet. We'll work that out later. Some of that is probably the nickeled front sight against the particular target. I'm breathing a little easier now. 2 months from first contact with S&W to having the gun back in my hands. No charge aside from the evaluation.
No comments:
Post a Comment
I only ask that you keep it clean and not spam readers. Thanks.