Nana took her Concealed Handgun Permit certification course today. I do believe that she learned a lot!
Saturday, June 27, 2015
Thursday, June 18, 2015
Range day...
It was a short range day today. Took the FT Ruger .45 with the ACP cylinder installed and shot up a box of 50 rounds of ACP loaded with 7 gr. Unique under the 200 gr. Hornady Combat Match semi-wadcutter bullet. This stuff was loaded many years ago for the Combat Commander. As expected it shot low as the gun was zeroed for the 255 gr at about 1000 fps. However, I was surprised at how low it shot. The load did group well though.
I also shot the adjustable sight Bearcat. It seemed zeroed for 25 yards as well but each chamber seemed to have its own group. 18 shots fired and there were 6 distinct 3-shot groups. Interesting.
Didn't have much time to do more.
I also shot the adjustable sight Bearcat. It seemed zeroed for 25 yards as well but each chamber seemed to have its own group. 18 shots fired and there were 6 distinct 3-shot groups. Interesting.
Didn't have much time to do more.
Thursday, June 11, 2015
Range day...
Had a pretty good range day but...
First, I took the M1 rifle out with some Lake City M2 and she did pretty good. The weight of the rifle makes it pleasant to shoot from the bench. Then I shot the SIG Sauer 938-22 and got it zeroed with the Winchester Dynapoints. She does ok at 25 yards and practice with the trigger helps a lot. I do NOT like the 3-dot sights. I may black them out as the dots give a confusing sight picture, at least for my eyes. I might black out the dots on the rear sight first, just to see what that does.
Then I wanted to shoot up some .45 ACP somebody gave me that was loaded with a light load under some 200 gr. plated RN bullets. I took my Ruger FT .45 Colt/ACP with the ACP cylinder for just this purpose. No go. The cartridges wouldn't go the last 1/4 to 5/16ths of an inch into the chambers. Poorly resized. No, I won't give you the name of the fellow who did this. I am going to try to recover these but we will just have to see if this will be doable without pulling all the bullets and dumping the powder.
Two of the club officers were out there shooting. One shoots only cast bullets and was trying cast in the 6.5-284 Winchester! The other brought his Schultz and Larsen .22, Anschutz Exemplar pistol and XP100. Lots of fun shooting!
First, I took the M1 rifle out with some Lake City M2 and she did pretty good. The weight of the rifle makes it pleasant to shoot from the bench. Then I shot the SIG Sauer 938-22 and got it zeroed with the Winchester Dynapoints. She does ok at 25 yards and practice with the trigger helps a lot. I do NOT like the 3-dot sights. I may black them out as the dots give a confusing sight picture, at least for my eyes. I might black out the dots on the rear sight first, just to see what that does.
Then I wanted to shoot up some .45 ACP somebody gave me that was loaded with a light load under some 200 gr. plated RN bullets. I took my Ruger FT .45 Colt/ACP with the ACP cylinder for just this purpose. No go. The cartridges wouldn't go the last 1/4 to 5/16ths of an inch into the chambers. Poorly resized. No, I won't give you the name of the fellow who did this. I am going to try to recover these but we will just have to see if this will be doable without pulling all the bullets and dumping the powder.
Two of the club officers were out there shooting. One shoots only cast bullets and was trying cast in the 6.5-284 Winchester! The other brought his Schultz and Larsen .22, Anschutz Exemplar pistol and XP100. Lots of fun shooting!
Sunday, June 07, 2015
Match Shooting
Feel pretty good this evening. Club had a .22 LR 50 @ 50 yard BR shoot today. I placed 3rd in the factory class with a 420 9x. Winner shot a 445 and 2nd shot a 425. Unlimited class was 490, 485 and 465. A new to us woman shooter shot the 485. We had 28 shooters total and... I took home $22 prize money.
My rifle was the Winchester 52C with Weaver T36 (1/8th minute dot) shooting Wolf Match Extra.
My rifle was the Winchester 52C with Weaver T36 (1/8th minute dot) shooting Wolf Match Extra.
Thursday, June 04, 2015
Range day...
Got to shoot today so took the nickeled S&W M34. Shot over 75 rounds, maybe as many as 100 rounds being a mix of 20-year old Federal HVHPs and Winchester Dynapoints and new Federal HVHP. I was surprised to find that the Federal, old or new, required a slight push to fully seat in the cylinder and would drag on the recoil shield sometimes very badly. The Dynapoints dropped right into the chamber and didn't drag at all. I guess this will ensure the Dynapoints get designated for this gun.
Also shot the Browning 1911-22. That gun is about the best one I have to shoot up that old Russian Junior ammo. It seems to love that ammo. Doesn't do badly with the Federal or Dynapoints either. For such a little gun it is pretty accurate. I think it will shoot better than I can shoot it right now. The small sights are a real challenge for me.
After having difficulties with the open sights on the 34 and 1911-22 I thought I would go back to my Tactical Solutions conversion on Combat Commander frame. This has a Burris Fastfire mounted. I think that sight is great for seeing a sight but it doesn't seem to easily give me much precision. While I could hit a head sized target at 50 yards I couldn't tell you where I would hit it. The target looked more like it had suffered several strikes from #4 buck than having been shot with a precision firearm.
When I got there a buddy (he's 75) was shooting his Rock Island .22 TCM. He has 2, one with the 5" barrel and one with a 4¼" barrel. John is a very experienced reloader. He says that he is having problems finding a bullet that is accurate in his reloads. He has tried several. The 5" barrel keyholes! If I understood correctly, I don't think it does this with factory ammo though. He was shooting at a measured 27 yards. His groups were in the 2½-3" range.
Also shot the Browning 1911-22. That gun is about the best one I have to shoot up that old Russian Junior ammo. It seems to love that ammo. Doesn't do badly with the Federal or Dynapoints either. For such a little gun it is pretty accurate. I think it will shoot better than I can shoot it right now. The small sights are a real challenge for me.
After having difficulties with the open sights on the 34 and 1911-22 I thought I would go back to my Tactical Solutions conversion on Combat Commander frame. This has a Burris Fastfire mounted. I think that sight is great for seeing a sight but it doesn't seem to easily give me much precision. While I could hit a head sized target at 50 yards I couldn't tell you where I would hit it. The target looked more like it had suffered several strikes from #4 buck than having been shot with a precision firearm.
When I got there a buddy (he's 75) was shooting his Rock Island .22 TCM. He has 2, one with the 5" barrel and one with a 4¼" barrel. John is a very experienced reloader. He says that he is having problems finding a bullet that is accurate in his reloads. He has tried several. The 5" barrel keyholes! If I understood correctly, I don't think it does this with factory ammo though. He was shooting at a measured 27 yards. His groups were in the 2½-3" range.
Subscribe to:
Posts (Atom)
