Wednesday, May 20, 2009

Remington Model 51

One of the coolest little .380 ACPs is the Remington Model 51. It FEELS good in the hand. I've shot one, once, a long time ago, but as I remember it it felt good in shooting. It looks modern but it is made with old time attention to detail. I think I read once that it undersold the Colt of that time (the 1908) by $5.00. That was a lot of money in 1930-something!  These guns were also made in .32 ACP. 

Today, a retired Virginia State Trooper brought one into the shop to see if we could get it apart for cleaning. It took a bit. We pushed the pin out the side then it was a free for all. Seems to me it takes both hands and a monkey to get the thing apart. You have to grasp the barrel AND slide and pull them apart and at the same time lift them from the frame. Must be a trick I don't know. At least I didn't know it until actually seeing the manual.  When in doubt, read the directions. Taking out the breech block is another push and lift exercise. THEN, to get the barrel out one has to get the timing of lifting the breech end of the barrel out while compressing the action spring. I think. Like I said it was a free for all.

The Remington Society is doing research on these pistols and has a research form. If you own one you might consider adding to the body of knowledge on these guns buy letting them know some details about yours. They also have a manual on the 51.

1 comment:

Home on the Range said...

A friend found one of those recently and brought it over. I agree, it took both hands and several Norwegian swear words to get it apart. But it was nice.